You building a scaler out of it?
i got an ax-10 kit with some up grades tell me what you think i will be building a zuk with it later
6 Cell 1400mah crawler pack side pack $18.99
Integy Matrix Pro Lathe Motor 45T Single $20.99
Traxxas TQ3 receiver $26.99
AX90001 Axial AX-10 with CKRC Stage 2 Kit $227.99
FREE Shipping on all orders over $300.00 $0.00
1830 Novak XRS Reversible Sport ESC $46.99
jconcepts iluzzion jammin body free lhs
zip ties 1.45
dielectric grease 1.85 each
velcro 4.00
thred lock 1.85
liquid electric tape 4.95
sheet metal free im a welder
the fun priceless
the springs are not going on right know maby droop later
V grove foams all the tires and 5 1/4 weights in each front 0 in rear
i might sipe the tires later and cut some more out of the foams in the front. the wheel whights take up alot of space in the rims.
the frame is for the zuk it is 1/9 scale of a zuks frame.
not ready to void the warranty on the xrs esc
the top is 9th scale
three narrowed rustler rims in the back and self explanetory in the front. the rims are down to 1.5 wide.
:thumbsup: mud
:arrowu:
and yes i draw on my walls :mrgreen:
You building a scaler out of it?
i will be building some sort of scaler slowly no sure if im going 2.2 or 1.9 no the rims but the comp rig as it sits is 2.2 so its hearin the 2.2. hear are some pics of the trany/transfer i am going to use. it is an old drill with a traxxas stinger 20t motor i think it will give some speed and crawl seeing as the drill is 2 speed. needs some mods but it will be slow.
note the movement its the shifting thingy.
![]()
i will be useing a rustler tranny and if the drill rustler thing dont work i will use the ax-10 trany but wont be able to make the full interire as wanted.
OK GOT SOME MORE DONE oops no all capsi moded the steering a little with one of the stock upper links going the other way than stock it gives the steering more time in parrelell.
motor tranny and transfer next to the frame
inside there is a drill bit to help stabelize it. and the grey is this stuff that is like steel when hard but starts like putty its called pro-poxy
![]()
messin around a bit and came up with some exo droop springs so know i dont have to take the shock apart to do droop :mrgreen: pic in a bit.
i got the links inside and got some Monster panels on
Bookmarks