Results 1 to 5 of 5

Thread: Pinion/spur setup

  1. #1
    Junior Member kingmudder's Avatar
    Join Date
    Feb 2013
    Location
    Fredericksburg
    Posts
    62

    Pinion/spur setup

    Was wondering what a good spur/ pinion setup would be on a scx10 with dual motors. Think they are 35t. But going to get some 15t for wheel speed. Of course still need some torque for when running 2.2s. Any ideas?

    Sent from my GT-S5360L using Tapatalk 2

  2. #2
    Member luenhsing's Avatar
    Join Date
    Sep 2012
    Location
    plano
    Posts
    720
    Make sure your ESC can handle two 15T motor first, I have a dual motor setup on my honcho, and using Novak Rooster, and the T35 is the limit on dual setup. I do get very good speed/Torque on 20T p and 80T s setup.

  3. #3
    Junior Member kingmudder's Avatar
    Join Date
    Feb 2013
    Location
    Fredericksburg
    Posts
    62
    Yeah didnt think to mention 15t are a later project. On it now are 35t. Is your wheel speed decent?

    Sent from my GT-S5360L using Tapatalk 2

  4. #4
    Member luenhsing's Avatar
    Join Date
    Sep 2012
    Location
    plano
    Posts
    720
    yes, it is a very good setup.

  5. #5
    Junior Member kingmudder's Avatar
    Join Date
    Feb 2013
    Location
    Fredericksburg
    Posts
    62
    Ok thanks.uploadfromtaptalk1389065929625.jpg

    Sent from my GT-S5360L using Tapatalk 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •