Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: ~TSS~ Wampa Build

  1. #1
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540

    Exclamation ~TSS~ Wampa Build

    well this is gonna be a big change for me. all my rigs run 45Ts and move slower than I do:mrgreen:

    picked up this new slider off ebay. didn't have to pay for all the stuff I was gonna throw away anyway.



    Parts came in


    Axial 2.2 Treps
    CI DD Softs
    TSS 2.2 Robby Gordons
    Tenshock SC411 (3500kv, 4 pole, Sensored, exact match to Pro4 HD)
    Mamba Max Pro
    Hitec HS-7954
    Hot Racing steering posts
    Hot Racing Carbon/Alum Bellcrank setup
    Axial 94mm universals
    Axial 16t stock pinion
    CI 6 bolt spare
    Vanquish trailing arms
    CFM DS collars
    Duuude rang
    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

  2. #2
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540
    first thing I did was strip it down to the pan


    Next I installed all the steering parts. Hot Racing parts were awesome fit and tolerance. I also bought the duuude rang, but the HR servo saver spring is MUCH harder than the stock one, so I left out the rang for now. 7954 installed.


    pulled the trans and t-case to check for lube. has some oil based lube (shown) that im sure would have worked fine, but I filled them up with my usual grease anyway.
    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

  3. #3
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540
    got the trans, motor, and esc in. twice (wish there was a better way to install/remove center shaft)


    VP trailing arms installed


    CFM driveshaft collars
    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

  4. #4
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540
    TSS wheels clear! even with thin SCX 5mm hexs and 225 hubs.:shock:
    about .5mm on nut side, and 1mm on button side at full lock. tons more when straight of course.


    I sent my panel idea to Clay at CFM, response was good"thumbsup"


    more to come....
    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

  5. #5
    Member
    Join Date
    Sep 2008
    Posts
    386
    What are you going to do with the 6 bolt spare?

  6. #6
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540
    will be painting it and using it for the 5th tire/spare on the mount on the back ;) has a really genious setup for that.
    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

  7. #7
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540
    next step is body.
    i did a Carbon Fiber wrap.:shock: my first time doing a wrap.
    I wish i had video of this stuff, if really dances in the light:shock: has actual woven texture too.

    (Thanks Tommy R for the taillight lenses"thumbsup")





    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

  8. #8
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540
    then i added some graphics. vinyl and stickers.
    ill probly buy a clear interior and paint one up. on the outside. i hate how plain and shiny the stock one is.




    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

  9. #9
    Member
    Join Date
    Sep 2008
    Posts
    386
    Quote Originally Posted by STANG KILLA SS View Post
    will be painting it and using it for the 5th tire/spare on the mount on the back ;) has a really genious setup for that.
    Right. I was talking about the spare's spare (6th wheel).

    What are you going to do with that one?

  10. #10
    Addicted to RC STANG KILLA SS's Avatar
    Join Date
    Aug 2008
    Posts
    2,540
    probly hang on to it incase i switch to black wheels
    2008 TXRCRCA Super Class State Champ
    2009 Runner Up
    and scaler freak :D

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •